New Product: Volk Racing G2.

Volk Racing has done it this time with the release of the G2.
I had always been a fan of the Volk TE37. I consider them an all time classic along with some of the old-school mesh wheels from BBS and the infamous LM.

With the inception of Rays Engineering in the world of Formula 1 and ALMS, Rays has taken wheel design and engineering to another level.

The G2 in Flat Black and Formula Silver.... pictures speak a thousand words~

New Product: Yokohama Advan RS-D

Finally, the long awaited Advan RS-D by Yokohama Original Design arrived in our store today. We were left in awe of the lightness of the wheels and the curvature of the spokes. The finish was spectacular as always.



Weight of Front 19 - 9.0 for BMW E9X M3 ~ 20.6lbs



Weight of Front 19 - 10.0 for BMW E9X M3 ~ 21.8lbs

New Product: Injen Intake for BMW 128i / 328i / 330i

Injen, a respectable intake company has release new offering for BMW 128i / 328i / 330i.

With gains of up to +10HP and +12 Ft.Lbs of Torque, this intake is a promising new addition for the BMW Marque, following their previous release of similar systems for the 335i / 535i.

They are offered in 2 kinds of finish: Black and Polished.

M3 orange

M3 orange, originally uploaded by anyett.

Don't know exactly what color this is, but it stands out.
Would have looked real nice with some CF lip and rear diffuser, front grille and side grilles!

And a little bit of the orange accent, perhaps the center caps on the wheels to totally individualize this beauty!

New Product: BBS RE-V

Although the BBS RE-V is currently, available in Japan only, we hope to see some stateside real soon (even if it means we have to import them direct from Japan!).

The BBS RE-V is a forged 1-piece wheel that comes in 19" diameter and width ranging from 8.5" to 10.0". They are only offered in the 5-120 bolt pattern and the 5-114.3 for now.

Here are some pictures that I managed to find: (thanks to dort of Japan).





[source: http://www.dort.jp/blog/diary.cgi]

Project D.A.S: Part 2

Project D.A.S: Part 1

our very good friend and Client, Danny is finally done with modding the car (for now...).

We supplied him with the following parts:
- 3D Design CF Front lip
- 3D Design CF Rear Diffuser
- 3D Design CF Trunk Lip Spoiler
- Arqray Side Fins
- CF Roof Spoiler
- CF Front Grille
- CF Side Grille
- CF Mirror Caps
- HRE Comp 93
- Eisenmann Race Exhaust System
- Eisenmann Connecting Pipes
- Active Autowerke Pulley Kit
- Fabspeed X-pipe with cat bypass

More pics to come soon on Part 2.

Photoshoot: Chitown ///M [nuskool]

Johan was at work again this weekend doing another photoshoot for a local member: nuskool of Chitown///M.


I don't think you can see the sign clearly, but check out the "BMW Parking Only All Others Will Be Crushed" Sign. Johan did a little PShop on that one.


Definitely a different vibe on this shoot. Color and composition are Amazing!


More Pictures on our Flickr

Packing a Honda N360 in a Toyota Regius Ace by Spoon Sports

Saw this today on SpeedHunters



Honda N360 loaded up in a Toyota Regius Ace, ready to be transported down to Suzuka circuit for a classic car show event by Spoon Sports

New Product: Macht Schnell Competition Spacer Kit

BMW Fanatics,

Are you looking for Spacers for increased Trak and that "Flush" look?
Look no further than the Macht Schnell line of Competition Spacer Kits!

Machined from 6061-T6 aerospace aluminum, these adapters are strong as well as lightweight to limit unsprung/reciprocating weight for maximum performance on or off the track. Spacer edges are also chamfered to allow for easy installation/removal if needed. After machining, the spacers are then anodized for additional strength, anti-corrosion & wear resistance.

They also come complete with extended bolts. We took the guess work out for you!



Call us at 312-370-7767 for more information on Macht Schnell Products!

New Product: RPI Ram Air Induction

Established in 1998, RPI has dedicated their efforts to bring the very best in performance parts. With their focus on Customer Service, Quality, Value and Honesty, matching the very principles that WheelSTO lives by, We are very proud and honored to carry RPI products!

Check Out Race Precion's Website

Nitto INVO releases 305/25-20 tires

We have been waiting for quite some time for a 305 wide tire from Nitto INVO.
They have answered with a new release.

These would go perfect with the 20" x 11.0 rear of the new Volk Racing G2, for the M3!

Woo Hoo!

BMW 130i tii Video by Format67

amazing video by Daniel Michaelis.

Tribute to the 1er Hatchback!


BMW 130i tii from Daniel Michaelis on Vimeo.

The "Devastator" is HRE Car of the Month!!!

The Project808 Devastator made HRE Car of the Month (june).
We are very excited to have been a part of this project.
Absolutely amazing car and although it started a little rocky, HRE pulled through for us as sponsors, together with Nitto and Fall-Line Motorsports.

Thanks guys!

Of course, much thanks to the owner of the car: Anup!



Check out HRE

Project808 DEVASTATOR Photoshoot

I was fortunate enough to take some pictures of Project808 "DEVASTATOR" today. It's amazing M3 in person and thank Anup@project808 for me having a great time to do this photoshoot.
More will come tomorrow

2008 BMW E92 M3 - Jet Black Fox Red

Active Autowerke Software Tune
Amuse Ericsson Front Bumper with splitters painted Porsche Slate Gray
Macht Schnell Spacers - 10mm F 5mm R
Eisenmann Sport Exhaust
HRE 20" P40 Monoblock Wheels - 20x9 F 20x10.5 R - Custom Brushed Face Jet Black Window
H&R Sport Springs
IND's Tinted sidemarkers Side Grills painted Porsche Slate Gray
Nitto INVO Tires 255/30/20 F 285/30/20 R
Tinted Tail Lights
Vorsteiner CSL Trunk
Vorsteiner Type I Diffuser

Sponsors:
WheelSTO
IND
HRE Wheels
Nitto Tires
Fallline Motorsports